Idaho State Statutes - Idaho Attorney Directory

All percentages shall be calculated on
the basis of weight.
The tolerances for the standards are on a container basis. However, if the
averages for the entire lot, based on sample inspection, are within the
tolerances specified in the standards, the contents of individual packages in
the lot may vary from the specified tolerances subject to the following
limitations.
In packages containing over 15 specimens, when the tolerance specified is
10 percent or more, not over one tenth (1/10) of the individual packages in
the lot may contain more than one and one-half (1 1/2) times the tolerance,
but no package may contain more than four (4) times the tolerance for soft rot
or wet breakdown.
When the tolerance specified is less than 10 percent, not over one tenth
(1/10) of the individual packages in any lot may contain more than double the
tolerance specified, but no package may contain more than four (4) times the
tolerance for soft rot or wet breakdown.
In packages containing 15 specimens, or less, not over one tenth (1/10) of
the individual packages in any lot may contain more than double any tolerance
specified, except that at least one (1) defective specimen shall be permitted
in a package.

Click here to visit the Official Idaho State Statutes